a1ide.device 53.3 (05.02.2009)
Config forced in $a1ide_conf : 1120
Xfer modes forced in $a1ide_xfer : 00DD
IRQ modes forced in $a1ide_irq : 1110
Running on AmigaOne
Found chip #0
---> Port 0
IOBase 000001F0, AltBase 000003F6
bmcr_base 0000CC00
MMIOBase 00000000
Config forced, no scan
2 device(s) on port
0 Master : 'ATA'
1 Slave : 'ATA'
Starting 'a1ide.device - chip 0 port 0' task
Trying to configure unit 0
Unit 0 is LBA48-capable but has LBA28 size
multi_count 16
Adjusting unit 0 to xfer mode 12
Unit configured, flags $0185
Trying to configure unit 1
multi_count 16
Adjusting unit 1 to xfer mode 12
Unit configured, flags $0187
Port 0 task started
---> Port 1
IOBase 00000170, AltBase 00000376
bmcr_base 0000CC08
MMIOBase 00000000
Config forced, no scan
1 device(s) on port
0 Master : 'ATAPI'
1 Slave : 'no device'
Starting 'a1ide.device - chip 0 port 1' task
Trying to configure unit 2
Adjusting unit 2 to xfer mode 67
Unit configured, flags $011D
Port 1 task started
All done
sii0680ide.device 53.3 (05.02.2009)
Config forced in $sii0680ide_conf : 0102
Xfer modes forced in $sii0680ide_xfer : 0C0D
Running on AmigaOne
Found chip #0
---> Port 0
IOBase 00802460, AltBase 0080246A
bmcr_base 00802480
MMIOBase 98100100
Config forced, no scan
1 device(s) on port
0 Master : 'no device'
1 Slave : 'ATA'
Starting 'sii0680ide.device - chip 0 port 0' task
Installing handler for irq 26
Trying to configure unit 1
multi_count 8
Adjusting unit 1 to xfer mode 66
Unit configured, flags $0185
Port 0 task started
---> Port 1
IOBase 00802470, AltBase 0080247A
bmcr_base 00802488
MMIOBase 98100100
Config forced, no scan
1 device(s) on port
0 Master : 'no device'
1 Slave : 'ATAPI'
Starting 'sii0680ide.device - chip 0 port 1' task
Trying to configure unit 3
Adjusting unit 3 to xfer mode 67
Unit configured, flags $011D
Port 1 task started
All done
unitnum 4 invalid (!chip)
unitnum 5 invalid (!chip)
unitnum 6 invalid (!chip)
unitnum 7 invalid (!chip)
unitnum 8 invalid (!chip)
unitnum 9 invalid (!chip)
unitnum 10 invalid (!chip)
unitnum 11 invalid (!chip)
unitnum 12 invalid (!chip)
unitnum 13 invalid (!chip)
unitnum 14 invalid (!chip)
unitnum 15 invalid (!chip)
[bootmenu] No preferred BootDevice specified
[bootmenu] Preferred keyboard device is "keyboard.device" unit 0
[bootmenu] PeekQualifier(): LMB is up, MMB is up, RMB is up
[bootmenu] Input handler installed
[bootmenu] Waiting 4 ticks for user input
USB System Software Task terminated
[bootmenu] Removed input handler
[bootmenu] PeekQualifier(): LMB is up, MMB is up, RMB is up
[bootmenu] Continuing normal boot sequence
Dump of context at 0xEFE4B7A0
Trap type: DSI exception
Machine State (raw): 0x0000D030
Machine State (verbose): [ExtInt on] [User] [IAT on] [DAT on]
Instruction pointer: in module Kickstart/4.1/kernel+0x0001C5C4 (0x0181C5C4)
Crashed process: RAMLIB: opening diskimage.device (0x6826E3A0)
DSI verbose error description: Access not found in hash or BAT (page fault)
Access was a load operation
0: 00000000 681BCEA0 00000000 00000000 681C70C0 681C70C0 021B0B60 00000000
8: 6826ED74 6826F03C 7FFCFCB4 000002C8 28002044 00000000 684BA7F0 00000000
16: 00350005 EFE5C580 00000000 021A63E6 6826E4B0 00000000 00000000 00000001
24: 00000001 00000018 6842B858 681C70C0 020924CC 00000000 6826ED74 6842B858
CR: 28002044 XER: 00000000 CTR: 0181C4EC LR: 0181C59C
DSISR: 40000000 DAR: 6826F000
Registers pointing to code:
r4 : module DEVS:diskimage.device at 0x681C70C0 (section 6 @ 0xA0)
r5 : module DEVS:diskimage.device at 0x681C70C0 (section 6 @ 0xA0)
r6 : native kernel module Kickstart/4.1/kernel+0x009B0B60
r8 : module DEVS:diskimage.device at 0x6826ED74 (section 3 @ 0xB4)
r10: module DEVS:diskimage.device at 0x7FFCFCB4 (section 5 @ 0xC94)
r19: native kernel module Kickstart/4.1/kernel+0x009A63E6
r27: module DEVS:diskimage.device at 0x681C70C0 (section 6 @ 0xA0)
r28: native kernel module Kickstart/4.1/kernel+0x008924CC
r30: module DEVS:diskimage.device at 0x6826ED74 (section 3 @ 0xB4)
ip : native kernel module Kickstart/4.1/kernel+0x0001C5C4
lr : native kernel module Kickstart/4.1/kernel+0x0001C59C
ctr: native kernel module Kickstart/4.1/kernel+0x0001C4EC
Stack Backtrace:
native kernel module Kickstart/4.1/kernel+0x0001C5C4
native kernel module Kickstart/4.1/kernel+0x0001D348
native kernel module Kickstart/4.1/kernel+0x00022074
native kernel module Kickstart/4.1/ramlib.kmod+0x00001898
native kernel module Kickstart/4.1/dos.library.kmod+0x0001EA6C
native kernel module Kickstart/4.1/kernel+0x0003A49C
native kernel module Kickstart/4.1/kernel+0x0003A51C
native kernel module Kickstart/4.1/kernel+0x0003A51C
Disassembly of crash site:
0181C5B4: 3AC00000 li r22,0
0181C5B8: 3960003C li r11,60
0181C5BC: 396B0004 addi r11,r11,4
0181C5C0: 7D2B4214 add r9,r11,r8
>0181C5C4: 8009FFC4 lwz r0,-60(r9)
0181C5C8: 2F80FFFF cmpwi cr7,r0,-1
0181C5CC: 409EFFF0 bne+ cr7,0x181C5BC
0181C5D0: 380B0003 addi r0,r11,3
0181C5D4: 5418003A rlwinm r24,r0,0,0,29
0181C5D8: 2E1C0000 cmpwi cr4,r28,0
Stack pointer (0x681BCEA0) is inside bounds
Redzone is OK (4)
68k register dump
DATA: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
ADDR: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Page information:
Page 0xEFE4E2C0:
Virtual Address: 0x6826F000
Physical Address: 0x00000000
Lock count: 0
Flags: ((null))
a1ide.device 53.3 (05.02.2009)
Build config : 4 units (1 chips, 2 ports, 2 units/port), 69 max mode, 128 max lba28, 65536 max lba48
Config forced in $a1ide_conf : 1120
Xfer modes forced in $a1ide_xfer : 00DD
IRQ modes forced in $a1ide_irq : 1110
Running on AmigaOne
Found chip #0
---> Port 0
IOBase 000001F0, AltBase 000003F6
bmcr_base 0000CC00
MMIOBase 00000000
Config forced, no scan
2 device(s) on port
0 Master : 'ATA'
1 Slave : 'ATA'
Starting 'a1ide.device - chip 0 port 0' task
Trying to configure unit 0
Unit 0 is LBA48-capable but has LBA28 size
multi_count 16
Adjusting unit 0 to xfer mode 12
Unit configured, flags $0185
Trying to configure unit 1
multi_count 16
Adjusting unit 1 to xfer mode 12
Unit configured, flags $0187
Port 0 task started
---> Port 1
IOBase 00000170, AltBase 00000376
bmcr_base 0000CC08
MMIOBase 00000000
Config forced, no scan
1 device(s) on port
0 Master : 'ATAPI'
1 Slave : 'no device'
Starting 'a1ide.device - chip 0 port 1' task
Trying to configure unit 2
Adjusting unit 2 to xfer mode 67
Unit configured, flags $011D
Port 1 task started
All done
sii0680ide.device 53.3 (05.02.2009)
Build config : 16 units (4 chips, 2 ports, 2 units/port), 70 max mode, 256 max lba28, 65536 max lba48
Config forced in $sii0680ide_conf : 0102
Xfer modes forced in $sii0680ide_xfer : 0C0D
Running on AmigaOne
Found chip #0
---> Port 0
IOBase 00802460, AltBase 0080246A
bmcr_base 00802480
MMIOBase 98100100
Config forced, no scan
1 device(s) on port
0 Master : 'no device'
1 Slave : 'ATA'
Starting 'sii0680ide.device - chip 0 port 0' task
Installing handler for irq 26
Trying to configure unit 1
multi_count 8
Adjusting unit 1 to xfer mode 66
Unit configured, flags $0185
Port 0 task started
---> Port 1
IOBase 00802470, AltBase 0080247A
bmcr_base 00802488
MMIOBase 98100100
Config forced, no scan
1 device(s) on port
0 Master : 'no device'
1 Slave : 'ATAPI'
Starting 'sii0680ide.device - chip 0 port 1' task
Trying to configure unit 3
Adjusting unit 3 to xfer mode 67
Unit configured, flags $011D
Port 1 task started
All done
unitnum 4 invalid (!chip)
unitnum 5 invalid (!chip)
unitnum 6 invalid (!chip)
unitnum 7 invalid (!chip)
unitnum 8 invalid (!chip)
unitnum 9 invalid (!chip)
unitnum 10 invalid (!chip)
unitnum 11 invalid (!chip)
unitnum 12 invalid (!chip)
unitnum 13 invalid (!chip)
unitnum 14 invalid (!chip)
unitnum 15 invalid (!chip)
[bootmenu] No preferred BootDevice specified
[bootmenu] Preferred keyboard device is "keyboard.device" unit 0
[bootmenu] PeekQualifier(): LMB is up, MMB is up, RMB is up
[bootmenu] Input handler installed
[bootmenu] Waiting 4 ticks for user input
USB System Software Task terminated
[bootmenu] Removed input handler
[bootmenu] PeekQualifier(): LMB is up, MMB is up, RMB is up
[bootmenu] Continuing normal boot sequence
SB128 found! :-)
SB128: Device = 8938, Vendor = 1102, Revision = 0
SB128: Did AC97 reset.
SB128: Did SRC wipe.
SB128: Did SRC init.
SB128: Did RATE init.
SB128: Did VOLUME init.
SB128: AC97 capabilities = 140
SB128: AC97_VENDOR_ID0 = 8384
SB128: AC97_VENDOR_ID1 = 7605
|
